Owner’s Manual
®
TM
TM
/
For service or information:
Customer Service at 800.90 or
Sales & Marketing at 866.90
+1 214-379-6000 or Your Authorized Distributor
TM
IMPORTANT SAFETY INFORMATION PLEASE READ FIRST
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.
This product employs an exposed radiant heating element on the bottom of the cavity. This element is
HOT during operation and will remain at dangerous temperatures after the unit is switched off. NEVER
attempt to touch the element during operation or while the oven is warm.
o
x
DO NOT store or use gasoline or any other flammable vapors or liquids in the vicinity of this or any
other appliance.
The information contained in this manual is important for the proper installation, use and maintenance
of this oven. Adherence to these procedures and instructions will result in satisfactory cooking results and
long, trouble-free service. Please read this manual carefully and retain it for future reference.
Errors—descriptive, typographic, or pictorial—are subject to correction. Specifications are subject to
change without notice.
Important Safety Instructions i
To Reduce the Risk of Fire in the Oven Cavity ii
Precautions to Avoid Possible Exposure
to Excessive Microwave Energy ii
Grounding Instructions ii
Power Supply Cord Replacement iii
RF Interference Considerations iii
Protective Earth (Ground) Symbol iii
Equipotential Bonding Symbol iii
Overview of the Tornado
TM
Specs and Dimensions 1
Dimensions
Construction
Standard Features
Accessories
Certifications
Packaging
Electrical Specifications 2
How the Technology Works
The Technology Behind the Tornado 3
Assembly and Installation
Installation Instructions 4
Delivery and Initial Inspection
Lifting the Oven
Oven Location and Placement
Securing Oven to Cart
Double Stacking Ovens
Built-In Installation
Installation Near Open Heat Source
Ventilation Requirements
Oven Assembly 7
Optional Installation Items 7
Oven Restraint Kit 7
Oven Carts 8
Loading a Menu from a Smart Card 9
Saving a Menu to a Smart Card 9
Common Operating Terms
Oven Operating Components 11
Modes and States 11
Common Cooking Terms 11
Faults and Errors 12
Table of Contents
Operating the Tornado
The Control Pad 13
Powering Up the Oven 14
Initial Power-Up
Power-Up
Voltage Sensing 14
Cooking Instructions 15
Turning the Oven Off 16
Editing a Food Item 17
Changing the Edit Pin Number
Editing a Food Item
Changing the Idle IR Set Temperature 18
Enabling/Disabling the Edit Mode 18
Cooking Options - Time, Done, and Snooze 18
The “Enter Cook Time” Screen
The “Done” Screen
The “Snooze” Mode
Recipe Development and Cooking Tips
Developing Recipes 21
Development Methodology
The Importance of Consistency
Ovenables 23
Dual-Ovenable Paper Board
Baking Papers/Sheets
Ceramics, Earthenware, Corningware
Toughened Glass
Plastics
NordicWare
What Not To Use
Maintenance and Troubleshooting
Daily Maintenance for the Tornado 25
Tips for Prolonging Oven Life 26
Troubleshooting 26
Catalytic Converter 29
Limited Warranty
North America Limited Warranty 30
International Limited Warranty 33
i
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When operating this oven, strictly adhere to the following safety precautions to
reduce the risk of burns, electric shock, fire, injury, damage to oven or property near oven, or
possible exposure to excessive microwave energy.
General Safety Information
a
Read all instructions before using this appliance.
a
Read and follow the specific “Precautions to be Observed to Avoid Possible Exposure to Excessive
Microwave Energy” found on page ii.
a
This appliance must be grounded. Connect only to a properly grounded outlet. See “Grounding
Instructions” on page ii.
a
Install or locate this appliance only in accordance with the provided installation instructions.
a
This appliance should be serviced by qualified service personnel only. Contact the nearest authorized
service facility for examination, repair, or adjustment.
a
Keep the cord away from heated surfaces.
a
Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without
appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave
oven is not always present.
.
a
: The contents of feeding bottles and baby food jars must be stirred or shaken and the
temperature checked before consumption, in order to avoid burns (IEC 60335-2-90).
a
Use this appliance only for its intended uses as described in this manual.
a
Only use utensils that are suitable for use in microwave ovens (IEC 60335-2-90).
X
use corrosive chemicals or vapors in this appliance; it is not designed for industrial/laboratory use.
X
: Failure to maintain the oven in a clean condition could lead to deterioration of the surface
that could adversely affect the life of the appliance and possibly result in a hazardous situation.
X
: heat liquids or other foods in sealed containers (e.g., jars, whole eggs, etc.) since
they are liable to explode.
X
allow children to use this appliance.
X
operate this appliance if it has a damaged cord or plug, is not working properly, or has been
damaged or dropped. See “Power Cord Replacement” found on page ii.
X
cover or block any openings on this appliance.
X
store this appliance outdoors.
X
use this product near water (e.g., near a kitchen sink, in a wet basement, near a swimming pool).
X
immerse the cord or plug in water.
X
let the cord hang over the edge of a table or counter.
X
use a water jet for cleaning. See pages 5-6 in this manual for proper cleaning procedures.
X
This appliance is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
Reducing Fire Risk
a
Remove wire twist-ties from paper or plastic bags used to facilitate cooking in the oven.
a
If materials inside the oven ignite, keep the oven door closed, turn the oven off, and disconnect the
power cord or shut off power at the fuse or circuit breaker panel.
a
If smoke is observed, switch off or unplug the oven. Keep the door closed to stifle any flames.
X
use the cook cavity for storage purposes.
X
overcook food. Carefully attend to the oven if paper, plastic, or other combustible materials are
placed inside the oven to facilitate cooking.
X
leave paper products, cooking utensils, or food in the cavity when the oven is not in use.
SAVE THESE INSTRUCTIONS
ii
INTRODUCTION
SAVE THESE INSTRUCTIONS
Grounding Instructions
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for the electric current. This oven is equipped with a cord
that has a grounding wire with a grounding plug, which must be plugged into an outlet that is properly
installed and grounded. Consult a qualified electrician or serviceman if uncertain about the ability to
follow grounding instructions or if doubt exists as to whether the appliance is properly grounded.
X
use an extension cord. If the power cord is too short, have a qualified electrician or
serviceman install an outlet near the appliance.
WARNING: Improper grounding can result in risk of electric shock.
Power Cord Replacement
If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly
qualified person.
Precautions to Avoid Possible Exposure to Excessive Microwave Energy
(a) Do not attempt to operate this oven with the door open since open-door operation can result in
harmful exposure to microwave energy. It is important not to defeat or tamper with the safety
interlocks.
(b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to
accumulate on sealing surfaces.
(c) Do not operate the oven if it is damaged. It is particularly important that the oven door close
properly and that there is no damage to the: (1) Door (bent), (2) hinges and latches (broken or
loosened), (3) door seals and sealing surfaces.
(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel.
RF Interference Considerations
The Tornado oven generates radio frequency signals. This device has been tested and was determined to
be in compliance with applicable portions of FCC part 18 requirements and to the protection require-
ments of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating
to electromagnetic compatibility at the time of manufacture. However, some equipment with sensitivity to
signals below these limits may experience interference.
If your equipment experiences interference:
a
Increase the physical separation between this oven and the sensitive equipment.
a
If the sensitive device can be grounded, do so following accepted grounding practices.
a
If battery-powered microphones are being affected, ensure that the batteries are fully charged.
a
Keep sensitive equipment on separate electrical circuits if possible.
a
Route intercom wires, microphone wires, speaker cables, etc. away from the oven.
Protective Earth (Ground) Symbol
This symbol identifies the terminal which is intended for connecting an external conductor for pro-
tection against electric shock in case of a fault, or the terminal of a protective earth (ground) electrode.
Equipotential Bonding Symbol
This symbol identifies the terminals which, when connected together, bring the various parts of an
equipment or of a system to the same potential, not necesarily being the earth (ground) potential,
e.g. for local bonding.
1
OVERVIEW OF THE TORNADO OVEN
Overview of the Tornado Oven
1: Dimensions of the Tornado
Oven
SPECS AND DIMENSIONS
Dimensions
Height 19” (482 mm)
with legs* 23” (584 mm)
Width 26” (660 mm)
Depth 25.7” (653 mm)
with handle (Tornado) 28.2” (716 mm)
with handle (Tornado 2) 28.45” (723 mm)
Weight 190 lb. (86 kg)
Height 8” (203 mm)
Width 15.5” (393 mm)
Depth 14.7” (373 mm)
Back 0” (0 mm)
Sides 2” (51 mm)
Top 4” (102 mm)
(minimum)
Crated 30” (787 mm)
Uncrated 24” (673 mm)
* Legs are 4” (102 mm).
Construction
o
430 stainless steel front, top and sides
o
4” (102 mm) adjustable legs
o
Stainless steel handle
o
Cool to the touch pull down door
o
304 stainless steel line
o
Fully insulated cook cavity
o
Lower cooking (IR) element
Standard Features
o
Integral recirculating catalytic converter for UL
listed ventless operation (UL KNLZ)
o
Variable-speed High h recirculating impingement
airflow system
o
Variable cooking surfaces (racks, stones, platters)
o
Independently-controlled bottom browning element
o
Smart Voltage Sensor Technology* (U.S. only)
o
Smart menu system capable of storing 128 recipes
o
Built-in self-diagnostics for monitoring oven
components and performance
o
Stackable design (requires stacking kit)
o
Manual snooze mode
o
Includes plug and cord (5 ft.)
o
Warranty – 1 year parts and labor
**North American models (NGC) only.
2
OVERVIEW OF THE TORNADO OVEN
Accessories (Additional Charge)
o
24” (610 mm) stainless steel oven stand with
locking casters
o
18” (457 mm) stainless steel oven stand with
locking casters
Certifications
Packaging
All ovens are packaged in a double-wall corrugated
box with integrated corrugated skids.
ELECTRICAL SPECIFICATIONS
NGC (1 Phase, 60 Hz )
Operating Voltage 208/240 VAC*
Current Draw 30 Amps
Phase 1 Phase
Frequency 60 Hz
Plug NEMA 6-30
Max Input 5990/6675 watts
Microwave Input Power 3500 watts
* Smart Voltage Sensor Technology automatically
senses the supply voltage and allows the user to
configure the oven to the correct setting (208 or
240) with the touch of a button.
NOTE: The Smart Voltage Sensor Technology
does not compensate for lack of, or over voltage
situations. It is the responsibility of the owner to
supply voltage to the unit according to the above
specifications.
NGCEW (3 Phase, WYE, 50 Hz)
Operating Voltage 400 VAC
Current Draw 16 Amps
Phase/Frequency 3 Phase/50 Hz
Plug IEC 309, 5 PIN (32 A)
Heaters Input Power 6300 watts
Microwave Input Power 3500 watts
NGCED (3 Phase, Delta, 50 Hz)
Operating Voltage 230 VAC
Current Draw 30 Amps
Phase/Frequency 3 Phase/50 Hz
Plug IEC 309, 4 PIN (32 A)
Heaters Input Power 6300 watts
Microwave Input Power 3500 watts
NGCUK (1 Phase, 50 Hz)
Operating Voltage 230 VAC
Current Draw 30 Amps
Phase/Frequency 1 Phase/50 Hz
Plug IEC 309, 3 PIN (32 A)
Heaters Input Power 6300 watts
Microwave Input Power 3500 watts
NGCBK (1 Phase, 60 Hz)
Operating Voltage 220 VAC
Current Draw 30 Amps
Phase/Frequency 1 Phase/60 Hz
Plug IEC 309, 3 PIN (32 A)
Heaters Input Power 6300 watts
Microwave Input Power 3500 watts
NGCJD (3 Phase, 50/60 Hz)
Operating Voltage 200 VAC
Current Draw 30 Amps
Phase/Frequency 3 Phase/50 or 60 Hz
Plug PSE, 4-blade (30 A)
Heaters Input Power 6300 watts
Microwave Input Power 3500 watts
NGCJK (1 Phase, 50/60 Hz)
Operating Voltage 200 VAC
Current Draw 30 Amps
Phase/Frequency 1 Phase/50 or 60 Hz
Plug PSE, 3-blade (30 A)
Heaters Input Power 6300 watts
Microwave Input Power 3500 watts
NOTE: Model NGC is typically the oven model
used in North America. NGCEW, NGCED,
NGCUK, NGCBK, NGCJD, and NGCJK are
primarily used in international markets and
locations.
3
HOW THE TECHNOLOGY WORKS
2: How the Technology Works
THE TECHNOLOGY BEHIND THE TORNADO
The Tornado uses a patented combination of high
speed forced air convection, heating, and micro-
wave energy to cook food up to 12 times faster
than conventional methods.
At a very high speed of circulation, a controlled,
smoothly flowing field of hot air forms a shroud
around the food. This takes place in conjunction
with measured, precise bursts of microwave energy,
creating a unique set of temperature and moisture
control conditions within the food that preserves
and enhances flavor.
Figure 2 illustrates the five steps of the technology
used by the Tornado Oven. These steps, described
below, are all computer controlled.
1. The internal heaters transfer energy to the
recirculating airflow.
2. The recirculating airflow circulates at speeds up
to 60 mph (100 km/h) down and around the
food item.
3. Simultaneously, a bottom radiant heater provides
heat transfer to the bottom of the food product.
4. The recirculating air passes through a Catalytic
Converter where excess grease and odors are
combusted and removed.
5. Working in parallel with the recirculating airflow
and bottom IR element, the microwave system
couples microwave energy from the bottom of
the cavity evenly into the food items.
NOTE: An easy way to understand our cooking is
to think of the microwave cooking from the inside
out and the airflow cooking from the outside in.
The two energy gradients meet and greatly reduce
the cook time.
How the Technology Works
4
INSTALLATION INSTRUCTIONS
The TurboChef Tornado is manufactured to
comply with applicable CE, NSF, UL, cUL, TÜV,
PSE, GOST R, FDA, and FCC requirements. All
equipment is designed and certified for safe opera-
tion when installed in accordance with local and/
or national codes. It is the owner and/or installer’s
responsibility to comply with any codes that may
exist.
Install the oven only in accordance with the proce-
dures detailed in this manual.
WARNING: Death, injury and equipment
damage can result from improper installation
of the oven or installation of a unit damaged
during shipment or storage.
o
x
DO NOT install an oven suspected of damage.
NOTE: Improper installation or the installation
of a unit damaged during shipment or storage may
result in the voiding of the Limited Warranty.
Delivery and Initial Inspection
All TurboChef speed cook ovens are shipped so
as to prevent damage.
Upon delivery, inspect the shipping container for
external damage. Any evidence of damage should be
noted on the delivery receipt which must be signed
by the driver.
Upon removing the oven from its shipping carton,
check for any possible damage. Make note of any
damage and contact the shipping company to file
a claim. Carriers will accept claims for concealed
damage if notified within fifteen (15) days of the
delivery and if the shipping container is retained
for inspection.
TurboChef does not assume responsibility for any
loss or damage suffered in transit. The carrier assumes
full responsibility for delivery in good order when
the shipment is accepted. However, when neces-
sary, TurboChef can assist in filing a claim.
Lifting the Oven
WARNING: Oven weighs approximately
190 lbs. (90 kg). Two or more people are
required to lift it.
Position at least one person on either side of the
oven. Lift from the bottom. Never lift the oven from
the front and rear. The countertop surface on which
the oven is placed must be at least 30” (762 mm)
deep and capable of supporting 200 lbs. (90 kg).
Once properly positioned on the counter, plug the
oven into a wall-mounted electrical receptacle. See
Electrical Specifications on page 2.
Oven Location and Placement
WARNING: Death, injury and equipment
damage may result from improper positioning.
It is the operator’s responsibility to ensure the
oven is properly positioned on countertop.
TurboChef will not warrant any damage or
injury to ovens that fall off countertops due to
improper placement.
Proper placement of the oven will enhance long-term
operator convenience and satisfactory performance.
Be sure to place the oven in an area accessible for
proper operation and servicing.
The surface on which the oven is placed must be at
least 30” (762 mm) deep and capable of supporting
200 lbs. (90 kg). The manufacturer shall not assume
liability for damage or injury resulting from the
improper installation of this equipment, including
temporary or unstable work stations or countertops.
ASSEMBLY AND INSTALLATION
Assembly and Installation
3: Oven Secured to Cart 4: Double Stacking Ovens
There must be at least 4” (102 mm) between the
top of the unit and any shelf or surface.
The oven must be installed level front to back and
side to side. For additional stability, the oven legs
may be bolted to the countertop if desired. An
optional Oven Restraint Kit (P/N TC3-0242) is also
available and can provide additional stability for
the oven. See page 7 for further information.
Securing Oven to Cart (Figure 3)
1. Lock the wheels of the oven cart.
2. Place the oven on the oven cart.
WARNING: Do not attempt to lift the oven
with fewer than 2 people.
WARNING: When lifting the oven, position
at least one person on each side.
WARNING: Do not lift the oven from the
front and back.
WARNING: Do not transport ovens on cart
when stacked.
3. Remove the oven legs. There will be holes in the
oven where the legs used to be.
4. Align holes in oven with holes on oven cart.
(Different sets of holes are provided on cart to
accommodate either the Tornado or C3.)
5. Install bolts with washers by running them up
through the cart surface and into the holes in
the oven (where the legs were). See Figure 3.
Double Stacking Ovens (Figure 4)
1. Ensure the surface that will hold the stacked
ovens can support the weight (500 lbs/227 kg).
2. Allow each oven time to cool and then unplug.
3. If you are stacking the ovens on a TurboChef
oven cart, make sure that the bottom oven is
bolted to the cart and wheels are locked (see
previous section).
4. Attach the Stacking Bracket (P/N TC3-0323) to
the back of the bottom oven:
a. Remove the screws marked with gray arrows
in Figure 4.
b. Align the holes on the Stacking Bracket with
the holes on the oven and reinstall the screws.
NOTE: Orient the bracket as shown in Figure 4.
5
ASSEMBLY AND INSTALLATION
6
ASSEMBLY AND INSTALLATION
5. Remove the legs of the oven that will be placed
on top. This requires two or more persons—at
least one person to lift and one person to
unscrew the legs.
6. Remove the screws from the oven that will be
placed on top, as marked with black arrows in
Figure 4.
7. Place the oven on top of the oven that has the
stacking bracket attached.
WARNING: Do not attempt to lift the oven
with fewer than 2 people.
WARNING: When lifting the oven, position
at least one person on each side. Do not lift
the oven from the front and back, and do not
use the handle to lift the oven.
8. Align the holes on the Stacking Bracket with the
holes on the top oven and reinstall the screws.
WARNING: Do not stack ovens over two-
high.
Built-In Installation (Figure 5)
TurboChef ovens are designed to be installed on
a countertop or table. They are not intended for
built-in or enclosed installation.
“Built-in or enclosed installation” is defined as
installing an oven in any structure that surrounds
the oven by five sides (i.e., top/rear/side panels and
base).
If installation must be “built in,” the operator
must ensure the following:
o
Minimum of 300 cfm (8.5 cmm) of supplement
flow within the cabinet.
o
Minimum clearances of 2” (51 mm) to every
surface.
In addition, the operator will be responsible for
compensating any extra time required to service
the product due to removing the product for
serviceability.
Installation Near Open Heat Source (Figure 6)
When placing a TurboChef oven near an open
heat source, strictly adhere to the following:
o
Verify oven location has a minimum 4” (102
mm) clearance on top and minimum 2” (51
mm) of clearance on each side.
o
If the oven is being placed near a grill or stove,
there must be a divider between the oven and
the open heat source, with a minimum of 6”
(152 mm) between the oven and the divider.
o
If the oven is being placed near a fryer, there
must be a divider between the oven and fryer,
with a minimum of 12” (305 mm) between the
oven and the divider.
o
The height of the divider must be greater than
or equal to the height of the oven (23”/584
mm).
Ventilation Requirements
The TurboChef Tornado oven has been approved
by Underwriter’s Laboratory for ventless operation
(UL KNLZ listing) for all food items except for
foods classified as “fatty raw proteins.” Such foods
include bone-in, skin-on chicken, raw ham¬burger
meat, raw bacon, raw sausage, steaks, etc. If cook-
ing these types of foods, consult local HVAC codes
and authorities to ensure compliance with ventila-
tion requirements.
To ensure continued compliance with all health,
building, and fire codes, you are required to
maintain clean and sanitary conditions around
your oven at all times.
NOTE: In no event shall the manufacturer assume
any liability for damages or injuries resulting from
installations which are not in compliance with the
instructions and codes previously listed. Failure to
comply with these instructions could result in the
issuance of a temporary cease and desist order from
the local health department until the environment
concerns are addressed.
OVEN ASSEMBLY
Oven Assembly
1. Carefully remove packing materials from the
wire rack.
2. Open the cook cavity door.
3. Remove packing materials from inside the oven.
4. Place wire rack in oven.
OPTIONAL INSTALLATION ITEMS
Oven Restraint Kit (P/N TC3-0242)
The Oven Restraint Kit is an optional system
intended to hinder the oven from moving forward
during use and/or cleaning. It will not prevent the
oven from falling off a countertop if the legs are
allowed to slide off the edge or if the oven is inten-
tionally or forcefully pulled off.
Proper installation instructions are included with
the Oven Restraint Kit. If additional help is needed,
call Customer Service at 800.90TURBO (+1 214-
379-6000) or your Authorized Distributor.
Fan
300 CFM (8.5 CMM)
Unobstructed
Airflow
Discharge
to Ambient
1: Must be included by contractor
Notes:
Unobstructed
Airflow
2.0" (51mm)
2.0" (51mm)
2.0" (51mm)
2.0" (51mm)
4.0"
(102mm)
6: Installation Near Open Heat Source
5: Built-in Installation
7
ASSEMBLY AND INSTALLATION
8
ASSEMBLY AND INSTALLATION
7: 24” (610mm) Cart with a Single Oven 8: 24” (610mm) Cart with a Single Oven
Oven Carts (P/N TC3-0143-1 & P/N TC3-0143-2)
There are two carts – 18” (457 mm) (TC3-0143-2)
and 24” (610 mm) (TC3-0143-1) – available for
use with the Tornado oven. See Figures 7 and
8 (above). Both carts can be used with single or
stacked ovens.
Dimensions for the two carts are listed below.
18” (457 mm) Cart:
Height 18” (457 mm)
with single oven 37” (940 mm)
with stacked ovens 56” (1422 mm)
Width 27.8” (706 mm)
with single oven 27.8” (706 mm)
with stacked ovens 27.8” (706 mm)
Depth* 26.625” (676 mm)
with single oven 37.6” (955 mm)
with stacked ovens 37.6” (955 mm)
24” (610 mm) Cart:
Height 24” (610 mm)
with single oven 43” (1092 mm)
with stacked ovens 62” (1575 mm)
Width 27.8” (706 mm)
with single oven 27.8” (706 mm)
with stacked ovens 27.8” (706 mm)
Depth* 26.625” (676 mm)
with single oven 37.6” (955 mm)
with stacked ovens 37.6” (955 mm)
* Depth with the oven door(s) open. With the
door(s) closed, the depth is 26.625” (676 mm)
or the depth of the cart.
Assembly instructions are included with the carts.
If additional help is needed, call Customer Service
at 800.90TURBO (+1 214-379-6000) or your
Authorized Distributor.
LOADING A MENU FROM A SMART CARD
At some point you may be required to overwrite the
existing menu settings with new ones via a smart
card. Please note that once the procedure below is
completed, the old menu settings will be perma-
nently lost.
1. Ensure the oven is in the /
mode.
2. Enable the function:
a. Simultaneously press the and keys.
b. Enter the code 6-3-6-8 (M-E-N-U) and press
.
c. Press 9 to enable .
3. Remove the lower access panel (Figure 9).
4. Insert smart card into oven (Figure 9).
5. Press the bottom-left soft key.
6. Select . The menu on
the smart card will load to the oven.
7. When this process completes, the oven will
beep. Remove the smart card and reattach the
lower access panel.
SAVING A MENU TO A SMART CARD
At some point you may be required to save your
existing menu settings to a smart card (for example,
if the control board needs to be replaced). Please
note that once the procedure below is completed,
any existing menu settings on the smart card will be
permanently lost.
1. Ensure the oven is in the /
mode.
2. Enable the function:
a. Simultaneously press the and keys.
b. Enter the code 6-3-6-8 (M-E-N-U) and press
.
c. Press 9 to enable . The oven will
return to / .
d. Simultaneously press the and keys.
e. Enter the code 7-2-8-3 (S-A-V-E) and press
. The oven will return to the /
screen.
3. Remove the lower access panel (Figure 9).
4. Insert smart card into oven (Figure 9).
5. Press the bottom-left soft key.
6. Select . The menu on the
oven will load to the smart card.
7. When this process completes, the oven will
beep. Remove the smart card and reattach the
lower access panel.
9
ASSEMBLY AND INSTALLATION
9: Insert Smart Card
10
ASSEMBLY AND INSTALLATION
This page left intentionally blank.
Common Operating Terms
OVEN OPERATING COMPONENTS
Display
The display is the primary interface to relay mes-
sages to the operator.
Keypad
The keypad is the primary interface for the opera-
tor to enter commands to the oven.
Cook Cavity
Cavity in which the food products are cooked.
MODES AND STATES
Mode
A mode is a software environment that allows certain
operations to occur. These modes consist of ,
-, , , , , and .
Off Mode
When in the mode, the cook cavity tempera-
ture is below 150
º
F (65
º
C), and power is not being
supplied to the oven’s main components – the con-
vection blower, heaters, magnetron circuits, and
radiant element. However, there is power to the
oven controls (keypad and display).
Warm-Up Mode
The mode in which the oven is warming itself to
the pre-defined cook cavity (CC) and radiant ele-
ment (IR) set temperatures.
Idle Mode
Mode in which an oven has successfully warmed
to the pre-defined set temperatures, and the oven is
ready to receive cook commands via the keypad.
When in the mode, the first 8 food groups
will appear on the display.
Until the oven receives cook commands, it will
cycle the blower motor/heaters in order to main-
tain the set temperature.
Cook Mode
Mode during which the oven is cooking (execut-
ing a food item). Note that a food item, or recipe,
is a sub-component of a food group (see
, below).
Cool Down Mode
During , the oven’s main convection
blower circulates until the cook cavity temperature
is below 150ºF (65ºC). All major oven components
are turned off except for the cooling fan, convec-
tion motor, and oven controls.
Edit Mode
The mode enables the user to change existing
menu settings.
Test Mode
The mode is a special diagnostic mode that
enables service technicians to turn the oven’s
systems on and off independently for the puspose
of testing them.
COMMON COOKING TERMS
Cook Cycle
A set of operations as defined by a food item, or
“recipe.”
Food Item/Recipe
A set of cooking parameters including total cook
time, IR set temperature, and events.
A recipe must have at least one (1) event and can
not have more than six (6).
Total Cook Time
The total duration (time) of a recipe.
11
COMMON OPERATING TERMS
12
COMMON OPERATING TERMS
IR Set Temperature
The operating temperature of the IR heating ele-
ment during a given recipe.
The IR heating element is the electrical heating ele-
ment located beneath the cooking rack which sup-
plies the heat used primarily to toast and/or brown
the underside of a product.
Event
A portion of a recipe with unique air and microwave
settings. A recipe must contain at least one event,
and cannot contain more than six.
Within an event, the user can determine percentage
time, percentage air, and percentage microwave.
See page 17 for more detail.
Percentage (%) Time
Each event is a percentage (0-100%) of the total
cook time. The sum of all event percentages must
equal 100%.
Percentage (%) Air
specifies the amount of impinge-
ment airflow (speed of convection motor) during an
event. Valid settings are 10 through 100%, in 10%
increments.
Percentage (%) Microwave (WAV)
specifies the amount of
time microwave is present during an event.
Valid settings are 0 through 100%, in 10% incre-
ments. For example:
o
0% WAV = no microwave present during event.
o
50% WAV = microwave present for the first 5
seconds of a given 10 seconds within the event.
o
100% WAV = microwave present for all 10 of a
given 10 seconds within the event.
Cook Cavity Actual Temperature
The actual temperature of the cook cavity as regis-
tered by the cook cavity thermocouple.
Cook Cavity Set Temperature
A pre-defined temperature to which the cook cavity
will warm and at which the oven will cook.
The cook cavity set temperature applies to all recipes.
Idle IR Set Temperature
A pre-defined temperature to which the IR element
will warm and remain until a recipe is selected to
cook.
The idle IR set temperature is pre-determined by
the menu developer and should not be changed
unless authorized by the menu developer.
See page 18 for more detail.
FAULTS AND ERRORS
Fault Code
A code that alerts the user a failure has occurred.
Upon discovering a fault, the display will repeatedly
flash the fault code and a brief description of the
failure.
Each fault is logged in the
(see page 26 for more detail).
Error Message
A message that is displayed when an unusual event
occurs. The display will flash an error message only
when it occurs, and will not log the occurrence in
the .
Self Test (STEST)
A special diagnostic function that tests all critical
subsystems to determine their operational state.
13
OPERATING THE TORNADO
OVEN
THE CONTROL PAD
Reference Figure 10.
1. Display
Displays operation and editing information.
2. Soft Keys
Eight keys adjacent to the display. Press a soft key
to select an option on the screen adjacent to the
key.
3. Arrow Keys
Press to navigate between screens, or within screen
if editing a recipe. Also used to access “code entry”
screen when pressed simultaneously from or
mode.
4. Stop Key
Press to immediately terminate a cook cycle.
5. Numeric Keys
Use to enter data in the mode, and to
manually input cook times if the screen is
enabled (see page 15 and 18 for more detail).
6. Back Key
Press to return to a previous screen. If in
mode, press to turn the oven off.
7. Enter Key
Used to save edited information in the mode
and to confirm a code entry.
Press the and keys simultaneously
from the or mode to access
the “code entry” screen.
1
2
2
3
3
4
5
6
10: The Control Pad
Operating the Tornado Oven
7
POWERING UP THE OVEN
Initial Power-Up
When power is initially applied, the “Initialization”
Screen will display the firmware version and the
oven’s serial number for five (5) seconds (Figure
11) before advancing to the screen. The
screen displays “Oven Off” in large text (Figure 12).
Press the “Oven On” soft key — displayed on the
lower right of the screen — to turn the
oven on and begin warmup.
NOTE: After one (1) hour in the mode, the
display goes to minimum intensity to prevent
burn-in. Press any key to re-illuminate.
Power-Up
1. If the display is dim, press any key to re-illuminate.
The screen will be displayed (Figure 12).
NOTE: The screen displays “Cooling
Down” if the cook cavity temperature is in excess
of 150ºF (65
º
C). Once the cook cavity has cooled
to below 150ºF (65
º
C), the screen will no
longer display “Cooling Down”.
NOTE: For U.S. models, the screen displays
the operating voltage.
2. Press the “Oven On” soft key to turn the oven
on and begin warmup.
3. The screen will display “Warming
Up,” the cook cavity temperature (CC), and the
IR Temperature (IR) (Figure 13).
4. When the cook cavity temperature is within 7ºF
(5ºC) of the pre-defined set temperature, the
oven will display “Ready to Cook” and an alarm
will sound.
The Display will immediately advance to the
screen, from which the user can select a food
group.
VOLTAGE SENSING
The oven is factory configured for 240 VAC.
Once plugged in, the oven will determine if the
incoming voltage differs from the current setting.
If the oven senses a 208 voltage supply, you will be
asked to change the voltage selection by selecting
the indicated voltage (Figure 14).
NOTE: The oven will not ask to be reconfigured
unless it detects the voltage supply has changed.
NOTE: Voltage sensing applies to U.S. oven
models only.
TRNADO_R 101906
NGCD-XXXXX
MENU LOADING...
OVEN OFF
AC VOLTS 240
OVEN
ON
S/N NGC-XXXXX
CC 74
O
F IR 113
O
F
WARMING UP
PLEASE WAIT
: Initialization Screen : Off Screen : Warming Up Screen
OPERATING THE TORNADO
OVEN
14
COOKING INSTRUCTIONS
From the screen, the user can select a food
group and item to cook:
NOTE: Press the key at any time to return to
the previous screen.
1. Place the food item into the oven.
WARNING: Inside of oven is HOT! Insert
food with caution.
2. From the screen, select the food group that
contains the item you wish to cook by pressing
the adjacent soft key (Figure 15).
NOTE: By pressing the key, eight addi-
tional menu groups will be displayed. In all, the
Tornado can store up to 16 menu groups, each
consisting of 8 menu items (128 total items).
3. From the screen, select the
food item you wish to cook by pressing the adja-
cent soft key (Figure 16).
4. The screen is disabled by
default. However, if it is enabled (Figure 17),
the user can enter a new cook time using the
numeric keys (if necessary). Or, if the current
cook time is adequate, simply press to
proceed with the cook cycle.
To enable or disable the
screen, see page 18.
5. Upon advancing to the screen, the oven
begins cooking. The screen displays the
name of the menu group, menu item, and the
running cook time.
NOTE: If a menu item contains no cook set-
tings, the oven will momentarily display “No
Cook Setting” and return to the screen.
NOTE: If the oven door opens during a cook
cycle, the display reads “Pause.” When the door
is closed, a “Resume” option appears. Continue
cooking by pressing the soft key adjacent to
“Resume.”
NOTE: If a fault is detected during a cook cycle,
cooking is terminated and an error message or
fault code will flash at the bottom of the screen.
6. When the cook cycle completes, the oven will
beep and display “Please Remove Food from
Oven” (Figure 19). If the food is done cooking,
remove the food.
WARNING: Inside of oven is HOT! Remove
food with caution.
: Voltage Sensing Screen
DETECTED 208 VAC
208 VAC
240 VAC
PLEASE SELECT
TO CONFIRM
: Idle Screen (Select Menu Group)
GROUP
A
GROUP
B
GROUP
C
GROUP
D
GROUP
E
GROUP
F
GROUP
G
GROUP
H
: Menu Item Select Screen
ITEM
1
GROUP A
ITEM
2
ITEM
3
ITEM
4
ITEM
5
ITEM
6
ITEM
7
ITEM
8
15
OPERATING THE TORNADO
OVEN
7. If the screen is enabled, the user has the
option to cook the item more or save an altered
cook time (the cook time would have been
altered only from the screen).
See Figure 20.
If “Cook More” is selected, close the oven door
and choose one of the following options:
a. Cook More - cooks the inside of the food
item more.
b. Brown More - cooks the outside of the food
item more.
c. Cook and Brown More - cooks both the
inside and outside of the food item more.
After a selection is made, the oven will cook the
item an additional 25% of the original cook
time, at a minimum of 10 seconds.
By default, the screen is enabled. To
enable/disable it, see page 19.
8. Repeat steps 5 through 7 until the food item is
done cooking.
TURNING THE OVEN OFF
From the screen, press the key until the
oven displays “Cooling Down” or “Oven Off.”
01:15
COOKING
MISC BAKE
BISCUIT
: Cook Screen : Enter Cook Time Screen
ENTER COOK TIME
START
02:00
16
OPERATING THE TORNADO
OVEN
DONE
PLEASE REMOVE
FOOD FROM OVEN
19: Please Remove Food Screen
DONE
COOK
MORE
SAVE
TIME
20: Done Screen
EDITING A FOOD ITEM
Changing the Edit Pin Number
By default, the number is “9.” For
instructions on changing the number,
contact Customer Service at 800.90 or
+1 214-379-6000.
Editing a Food Item
1. From the or mode,
simultaneously press the and keys.
2. Enter the code “9” and press .
3. Using the and arrow keys, change the
cook cavity set temperature (if necesary). This is
the temperature at which all items will cook.
4. Press .
5. Select the group that contains the food item you
wish to edit by pressing the adjacent soft key
(Figure 22).
NOTE: If necessary, press the arrow key
to scroll to display the second set of food groups.
6. Select the food item you wish to edit by pressing
the adjacent soft key.
7. Adjust the following components of a food item
(see Figure 23 - to navigate from field to field,
press the or key):
a. Group Name - Press the top-left or top-right
soft key to move from one character to another
in the group name field.
To change a character, use the numeric keypad
to enter a letter or number. NOTE: “1”
contains punctuation marks. Also, press “0”
once for a blank space, or twice for a “0.”
b. Item Name - Edit process same as “Group
Name,” above.
c. Cook Time - Enter the cook time using the
numeric keypad.
d. IR Set Temp - Enter the IR set temperature
using the numeric keypad. The setting will
round to the nearest 50ºF increment (20ºC
increment).
e. Events 1 through 6 - Edit using the numeric
keypad. For more information on events 1
through 6, see page 12.
8. If testing the new settings is required:
a. Wait until the ‘Warming Up” message
disappears from the bottom of the screen.
b. Insert food item into cook cavity.
GROUP
A
EDIT GROUPS
GROUP
B
GROUP
C
GROUP
D
GROUP
E
GROUP
F
GROUP
G
GROUP
H
22: Group Select Screen (Edit Mode)
ITEM 1
< GROUP A >
%TIME
COUNT 0
COOK TIME 01:30
WARMING UP
%AIR %WAVE
1
2
3
4
5
6
25
9
24
18
24
0
10
50
10
30
40
10
0
30
0
40
0
0
TEST
SAVE
IR SET TEMP 1150
0
0F
23: Edit Recipe Screen
OPERATING THE TORNADO
OVEN
17
SET TEMP 500
O
F
PRESS "ENTER"
OVEN
OFF
: Edit Temperature Screen
WARNING: Inside of oven is HOT! Insert
food with caution.
c. Close the oven door and press the bottom-left
soft key to test the new settings.
d. Follow steps 5-8 in the section titled
, pages 15-16.
9. Press the bottom-right soft key to save the new
settings. Doing so will permanently replace old
item settings.
10. When done editing recipes, press the key
until returned to the or
screen.
CHANGING THE IDLE IR SET TEMPERATURE
WARNING: The idle IR set temperature is
pre-determined by the menu developer.
Changing this setting is not recommended,
unless performed by the menu developer or
TurboChef Culinary or Engineering staff.
Valid idle IR settings range between 500-1150ºF
(260-620ºC). The temperature will be rounded to
the nearest 50ºF (20ºC) increment.
To change the idle IR set temperature:
1. From the or mode, simulta-
neously press the and keys.
2. Enter the code 9-4-2-8 (W-H-A-T) and press
.
3. Press the key to scroll to screen 2 of the
mode.
4. Press the soft key adjacent to “IR SI” (bottom-
right soft key) and press .
5. Using the Numeric Keypad, enter a new idle IR
set temperature.
6. Press to confirm the change.
7. Continually press the key to return to the
/ mode.
As a general rule, the idle IR set temperature
should be the average of all food item IR set
temperatures (typically 1000ºF). This prevents the
IR element from having to drastically warm up or
cool down between cook cycles.
ENABLING/DISABLING THE EDIT MODE
The mode can be disabled to prevent
unauthorized editing of food items/cook cavity set
temperature.
To enable/disable the mode:
1. From the or mode,
simultaneously press the and keys.
2. Enter the code 8-4-3-3 (T-I-D-E) and press
.
3. When prompted, pressing “9” will enable
mode. Pressing any other numeric key will
disable mode.
COOKING OPTIONS TIME, DONE, AND
SNOOZE
The “Enter Cook Time” Screen
Enable the screen to provide the
option to change the cook time of a recipe before a
cook cycle initiates (see page 15).
To enable/disable the screen:
1. From the or mode, simulta-
neously press the and keys.
2. Enter the code 8-4-6-3 (T-I-M-E) and press
.
3. When prompted, pressing “9” will enable the
screen. Pressing any other
numeric key will disable the
screen.
18
OPERATING THE TORNADO
OVEN
The “Done” Screen
Enable the screen to provide the option to:
- Cook an item longer after the completion of a
cook cycle.
- Save a changed cook time (only if the
screen is also enabled).
See page 16.
To enable/disable the screen:
1. From the or mode, simulta-
neously press the and keys.
2. Enter the code 3-6-6-3 (D-O-N-E) and press
.
3. When prompted, pressing “9” will enable the
screen. Pressing any other numeric key
will disable the screen.
The “Snooze” Mode
Enable the screen to allow for fast oven
recovery whenever the oven is turned off.
When the oven is in mode, all oven
operations are turned off, but the heaters remain on.
The cook cavity will remain at the set temperature
and the actual IR temperature will drop 200ºF
(104ºC) below the IR set temperature.
By default, mode is disabled.
To enable/disable mode:
1. From the or mode, simulta-
neously press the and keys.
2. Enter the code 7-6-6-9 (S-N-O-Z) and press
.
3. When prompted, pressing “9” will enable the
mode. Pressing any other numeric key
will disable the mode.
To access mode:
1. Ensure mode is enabled (see preceding
steps).
2. From the mode, press the key to turn
the oven off.
3. Press the bottom-left soft key to enter
mode, or press the bottom-right soft key to
proceed to the mode.
4. If mode was selected, the oven will
enter mode. From mode, press
the bottom-left soft key to proceed to the
mode, or press the bottom-
right soft key to turn the oven back on.
OPERATING THE TORNADO
OVEN
19
This page left intentionally blank.
20
OPERATING THE TORNADO
OVEN
21
RECIPE DEVELOPMENT AND COOKING TIPS
DEVELOPING RECIPES
TurboChef ovens use a combination of hot air and
microwave energy to cook food. While experience
with a convection or microwave oven will reveal
both similarities and significant differences, the key
to creating good recipes for a variety of different
food items is to understand the following rules:
1. TurboChef ovens use a moving shroud of hot air
to surround the food and lock in moisture.
2. The hot air provides most of the heating and
browning of foods. The higher the air velocity,
the faster heat energy is transferred to the food.
3. The microwave provides heat to the center of
the food. Do not try to do all the cooking with
the microwave.
4. The weight of food determines the Total Cook
Time required. The more weight, the longer the
required Total Cook Time. (Most medium thick
crust pizzas cook in about 100 seconds.)
5. Thick and dense foods may need to be flipped
half way through the Cook Cycle.
6. The microwave tends to work best in the earlier
stages of cooking, then use hot air to finish off the
cooking process.
7. Color develops primarily at the end of a Cook
Cycle. Higher velocities of air in the later stages
of cooking will strongly control the food’s color.
Development Methodology
When developing a recipe, it is important to keep
the following in mind:
1. The Total Cook Time depends heavily on the
weight, portion and makeup of a product.
When developing a recipe for the Tornado, a
good starting point for the Total Cook Time is to
divide the item’s conventional cook time by 10.
2. The two main components of an Event are the
Percentage Microwave and Percentage Air. Each
affects a product differently.
o
Air provides color, caramelization, and texture,
when moisture is not active.
o
Microwave rapidly cooks a product and keeps
the product’s moisture moving.
Although the Tornado oven is a speed cook oven,
thinking in terms of conventional cooking methods
can be a great help in establishing a good starting
point from which to begin testing and refining a
recipe’s settings.
By looking at the cooking process behind three
different types of products, the following examples
highlight the connection between traditional cook-
ing methods and the world of speed cooking.
Example 1: Frozen Pizza
A frozen pizza will have to be defrosted, cooked
and then finished. These three stages – defrost, cook
and finish – correspond to speed cooking as follows.
Defrost:
High microwave to bring the item out of the fro-
zen state.
Cook:
Microwave and air are used to cook the Item.
Depending on the item, cooking may need to take
place over several Events to maximize the quality.
Recipe Development and Cooking Tips
22
Finish:
Little to no microwave is used. The air is moderate
to high to finish the caramelization of the product,
and achieve the desired color.
A recipe might look like this:
Example 2: French Fries & Frozen Puff Dough
Items
Just like with a frozen pizza, these two items will
have to be defrosted, cooked and then finished.
However while French fries and frozen puff dough
items must go through the same stages of cooking,
the specifics of these stages will differ based on the
specific properties of the items being cooked.
A recipe for French fries might look like this:
For frozen puff dough, the recipe could be:
Note that for the frozen puff dough, a rest was
added between the cooking and finishing steps. This
allows the product to achieve its full-layered effect.
The Importance of Consistency
Speed cook ovens leave little room for error and
a slight change in the product’s weight or starting
state can have major effects on the final outcome.
Because of this, product consistency is extremely
important in developing and using recipes.
When developing and using recipes, a consistent
outcome will depend on keeping the following
variables constant.
o
Portion and/or weight
o
Beginning temperature and state
The same product cooked from frozen and fresh
will have two very different recipes.
o
Cooking vessel
Different materials react with the technology in
different ways. For a list of suggested cooking
materials for use with the Tornado
oven, see the
Ovenables section on the following page.
o
The oven’s state
It is recommended that the oven be on for at
least 30 minutes prior to developing recipes.
Don’t be Afraid to Experiment
In developing recipes, don’t be afraid to experiment.
Write down current settings and then start testing
variations. Old recipes can always be re-programmed
into the oven in a matter of seconds.
NOTE: After entering or editing a recipe, it is best
to back out of the Edit Mode and run the Recipe in
the On Mode.
NOTE: C3 and Tornado recipes and cook settings
are not interchangeable.
STEP EVENT %TIME %AIR %WAV
Defrost 1 30 10 100
Cook 2 40 50 90
Finish 3 30 60 30
4 0 10 0
5 0 10 0
6 0 10 0
RECIPE DEVELOPMENT AND COOKING TIPS
STEP EVENT %TIME %AIR %WAV
Defrost 1 80 100 80
Cook 2 10 100 90
Finish 3 10 100 0
4 0 10 0
5 0 10 0
6 0 10 0
STEP EVENT %TIME %AIR %WAV
Defrost 1 20 20 90
Cook 2 50 60 20
Finish 3 10 40 0
4 20 80 0
5 0 10 0
6 0 10 0
23
RECIPE DEVELOPMENT AND COOKING TIPS
OVENABLES
When cooking with the Tornado, using the
following products will help prolong the life of the
oven and enhance food quality.
Dual-Ovenable Paper Board
o
Pactiv
®
Pressware
o
Champion (recently purchased by Pressware)
o
Chinet Company Ovenware II
Although designed as single use, dual-ovenable
paper board, paper pulp, and plastics can usually
sustain multiple uses before being disposed. In
addition to reducing the number of dishes to wash,
these products perform well and do not break
when dropped in the middle of a busy kitchen.
Dual-ovenable paper board, paper pulp, and plastics
can serve as the packaging material from the food
manufacturer, and in some cases can function as the
serving container as well.
“Crimped” paper board is Pressware. The crimps
relax during cooking. These containers will not
accept a dome lid; however, they can be sealed with
lidding film.
Dual-ovenable pulp paper products (Chinet Co.
Ovenware II) are molded. They perform similarly
to Pressware but do not deform and will accept a
snap-on dome lid after cooking. These products
look best in black, as light colors slightly discolor
in the oven.
Both products are available in many shapes and
sizes, and are priced proportionately. The small-
est suitable size should be used to minimize cost.
Usable life can be extended 2-3 times by using an
inexpensive baking sheet as a liner.
Baking Papers/Sheets
o
Silicone-coated or Quillon
In many cases, paper baking sheets can be used alone
in the oven. The need for Pressware/Ovenware II
is mostly to contain significant fat/moisture from
some foods during cooking. Silicone-treated baking
sheets are more suitable to TurboChef applications,
and the paper comes in different weights. Quillon
paper does work, but will discolor and become
brittle much more easily.
Ceramics, Earthenware, Corningware
Ceramics, stone/earthenware and corningware can
be successfully used in the oven. These products
may absorb a bit more microwave energy than the
paper or plastic products, but this is easily adjusted
in the cook setting, often without extending cook
times. The ability to be used almost indefinitely
makes these products advantageous for long term
costs. However, they absorb a lot of heat energy in
the oven and are heavier than other alternatives, so
handling is a safety issue. If dropped, ceramics and
stone/earthenware may break, but if maintained,
will outlast the restaurant. Handling/dishwashing
costs should be considered.
Toughened Glass
o
Pyrex
®
and Borosilicate Glass
Toughened glass (Pyrex) performs well in the ovens
and shares the benefits and drawbacks of ceramics
and stone/earthenware products. Pyrex, although it
performs well, should be contemplated for use in a
commercial kitchen very carefully. If dropped, Pyrex
can break into many small pieces and slivers of glass,
posing a potential risk to food safety.
24
Plastics
o
CPET and PCTA
CPET and PCTA plastic containers may be used,
but are dangerous. If there is no alternative to CPET
or PCTA, then the application must be carefully
structured and controlled. Although PCTA has a
melting temperature approximately 50ºF (25ºC)
higher than CPET, both products perform similarly.
Both can get soft, deform and possibly melt in the
TurboChef.
Users need to consider the foods to be cooked,
cook times, cook settings, and oven temperature set
point. Specifically, oils and fats contained in foods
can become hotter than the melt point of the plastics
when subjected to extended microwave and high
air temperature. If using CPET/PCTA, the oven
set temperature needs to be reduced to 400-425ºF
(204-218ºC) and the IR Set Temperature must be
reduced to 500ºF (260ºC).
Used within the constraints of the material, plastic
containers hold their shape well, and can accept a
snap-on lid designed for the application, making
them suitable for HMR applications. Foods can be
shipped in the container from the manufacturer with
a film seal lid. (Remove the film for cooking and
snap on a dome lid after cooking.) These containers
are easily formed to most shapes and configura-
tions, and have an “upscale” look and presentation.
NordicWare
®
Constructed from heavy-duty, high-temperature
plastics, NordicWare
®
products are a valuable utility
in the oven, especially in a “ribbed tray” or “oval
plate” which is good for heating seafood, pasta, or
side items. These products are ideal because of
their low cost and ability to be reused.
What Not To Use
The following products are not suggested for use
in the Tornado oven.
o
x
Metal pans
o
x
Metal foil
o
x
Plastic wrap
o
x
Wax paper
o
x
Non-toughened glass
o
x
Wood containers (skewers ok)
o
x
Non-ovenable plastics
o
x
Cutlery
o
x
Temperature probes
o
x
Tie tags
o
x
Styrofoam
o
x
Non-ovenable paper products
RECIPE DEVELOPMENT AND COOKING TIPS
25
MAINTENANCE AND TROUBLESHOOTING
DAILY MAINTENANCE FOR THE TORNADO
When cleaning the oven, use only TurboChef
Oven Cleaner. Any other cleaning products can
damage critical parts, resulting in a non-warranty
service call.
Supplies and Equipment
TurboChef Oven Cleaner (P/N 103180 USA,
103380 Intl), Oven Guard (P/N 103181 USA,
103381 Intl), nylon scrub pad, cleaning towel
Step 1: Prepare the Oven
o
Turn oven off by pressing the key.
o
The oven will display / .
o
x
attempt to clean oven during the cool
down cycle. Cooling takes appx. 90 minutes.
: The oven operates at appx. 500
º
F
(260
º
C) and may cause injury if not allowed
time to cool properly.
Step 2: Remove the Lower Access Panel
o
Wipe out any crumbs that have collected.
Step 3: Remove and Clean the Cooking Surface
o
If rack, wash, rinse, and sanitize.
o
If baking stone, gently dry-scrub. If the stone
gets wet, let it thoroughly air-dry.
Step 4: Lift Bottom Element
o
Be sure the bottom element is cool prior to lifting.
: The bottom element operates at
appx. 1000
º
F (537
º
C).
Step 5: Remove Particles and Spray Oven
Interior with TurboChef
®
Oven Cleaner
o
Using a damp towel, remove large food particles.
o
If stubborn stain is present, sparingly spray
TurboChef Oven Cleaner onto the stain.
o
Allow cleaner to penetrate for five (5) minutes.
o
x
saturate the bottom of the oven with
water or oven cleaner.
Step 6: Clean Oven Interior
o
Using a nylon scrub pad, clean the oven door
and cook cavity.
: apply pressure to the
wave guide covers. Breaking will result in a
non-warranty service call.
Step 7: Wipe Out Oven Interior
o
Wipe oven door, bottom element, and cook
cavity using a damp towel.
Step 8: Clean Lower Access Panel Area
o
x
spray any chemical in this area or into
any other openings in the oven, such as the
louvers in the side panels or the cooling fan on
the back cover. Doing so will damage critical
electrical components and result in a non-
warranty service call.
Step 9: Lower the Bottom Element and
Reinstall the Cooking Surface and Lower
Access Panel
Continued on next page.
10
9
876
1 2 3 4 5
26
Step 10: Apply Oven Guard and Clean Oven
Exterior
o
Spray Oven Guard on towel. Wipe sides of cook
cavity and inside of door.
o
x
spray Oven Guard directly into cook
cavity or wipe on nozzle plates/bottom element.
o
Wipe the oven exterior with a clean, damp towel.
o
Oven is ready to turn on.
TIPS FOR PROLONGING OVEN LIFE
DO:
o
Ensure the oven is cleaned daily.
o
Use only TurboChef Oven Cleaner.
o
Remove items from the oven as soon as they
are cooked.
o
Use only microwave-safe TurboChef-approved
cooking accessories in the oven.
o
Review cooking instructions to ensure oven
settings are correct for corresponding products.
o
Call Customer Service (800.90TURBO or
+1 214-379-6000) or your Authorized
Distributor immediately if wave guide covers
are broken.
o
Keep this manual for future reference.
DO NOT:
o
x
Lift the oven by its handle.
o
x
Slam or mishandle the oven door.
o
x
Place foil or metal objects of any kind in the oven.
o
x
Operate the oven without food in the cook
cavity.
o
x
Frequently open and close the door to check
the product.
o
x
Cook items wrapped in plastic or any type of
cling film.
o
x
Put products in the oven until ready to cook.
o
x
Use cleaning agents that are not approved for
the oven.
o
x
Allow any cleaning solution or water to remain
on the cook cavity floor after cleaning or at any
other time.
o
x
Place excessive weight on top of the oven.
TROUBLESHOOTING
In order to save time and money, please perform
the following steps prior to calling for warranty
service. Reference Table 1 on page 27.
1. Press the key until the oven screen reads
“Cooling Down” or “Oven Off.”
2. Record the serial number (near the top of the
screen).
3. Simultaneously press the “4” and “6” keys to
view the oven faults.
4. Record the cook count (second line on the
screen) and any faults (F1 to F6) that have
occurred.
5. Press the key, and then the “Self-Test”
soft key to initiate an oven self test.
6. Once all subsystems are tested, record which
ones - if any - display a “Fail” message.
7. Press the key until the oven screen reads
“Cooling Down” or “Oven Off.”
8. Press the bottom-right soft key to turn on the
oven. Allow the oven to warm up to its set
temperature.
Upon completing the above steps, please have the
information recorded ready when calling Customer
Service at 800.90TURBO/+1 2143796000 or
when calling your Authorized Distributor.
MAINTENANCE AND TROUBLESHOOTING
27
Table 1: Error Codes/Faults, Possible Causes and Suggested Remedies
The following is a list of fault codes and error messages, along with the possible problem(s) that the oven
may be experiencing. Please attempt the recommended action before calling Customer Service.
NOTE: Any fault codes listed in bold will terminate a cook cycle upon discovery. F6 will not terminate a
cook cycle; however, it will alert the user of a possible air circulation problem.
ISSUE POSSIBLE CAUSES RESOLUTION
No power to oven.
o
Oven is not plugged in.
o
Main circuit breaker is tripped.
o
Plug oven in.
o
Verify wall circuit breaker is on.
Reset breaker and then power oven
back on.
Oven is not warming
up properly.
o
Oven is in state.
o
Door is not closed.
o
Oven has been switched off at
the main circuit breaker.
o
Press the soft key.
o
Close the cook cavity door.
o
Press the key until the oven
is in the state – leave for two (2)
minutes. Unplug the oven – leave for
two (2) minutes. Re-plug in the oven,
switch on the isolator/main power
supply, and press the soft
key.
Display reads
“Oven Door Open”
and alarm sounds.
o
Oven door is open.
o
Door switches are out of
alignment.
o
Open and close the door several times.
o
Call Customer Service.*
Oven is not
cooking properly.
o
Oven is not clean. (Large
deposits of grease, carbon, or
food debris dilute the micro-
wave.)
o
Incorrect Group and/or
Item name was selected for
the product.
o
Product was not cooked from
correct starting state (for
example, chilled or frozen).
o
Clean the oven following the cleaning
instructions on page 25.
o
Check to make sure correct food
group and/or item was selected for the
product being cooked.
o
Ensure product was in the correct
state before being placed in the oven.
*For Customer Service, call 800.90TURBO/+1 2143796000 or your Authorized Distributor.
MAINTENANCE AND TROUBLESHOOTING
ISSUE POSSIBLE CAUSES RESOLUTION
F1: Blower Running
Status Bad
o
Oven power interrupted.
o
Verify wall circuit breaker is on.
Reset breaker and then power the
oven back on.
o
Place the oven into Off State for two
(2) minutes, disconnect the plug for
minimum of two (2) minutes, re-plug
in the oven and and press the
soft key.
F2: Cook
Temperature Low
o
Oven power interrupted.
o
Air nozzles on the top of the
cook cavity are clogged.
o
Oven door is out of alignment.
o
Defective heater.
o
Blower motor not running.
o
Oven not fully warmed-up.
o
Verify wall circuit breaker is on.
Reset breaker and then power oven
back on.
o
Open oven door and verify the air
nozzles on the top of the cook cavity
are clean and not clogged.
o
Open and close the door several times
and verify oven door is closed. Reset
high-limit located in the bottom left
corner of the oven rear wall.
o
Call Customer Service.*
o
Perform self-test (page 26) and call
Customer Service.*
o
Repeat warm-up and allow oven to
idle for five (5) minutes.
F3: Magnetron
Current Low
o
Microwave circuit defective.
o
Perform self-test (page 26) and call
Customer Service.*
F4: Door Monitor
Defective
o
Oven door switches are out of
order.
o
Perform self-test (page 26) and call
Customer Service.*
F5: Magnetron Over
Temperature
o
Blockage of cool air into
the oven.
o
Rear cooling fan exhaust
guard is clogged.
o
Check for paper towels or anything
that may be obstructing cool air into
the oven.
o
Check rear fan to see if it is free of
debris. Clean as required.
28
MAINTENANCE AND TROUBLESHOOTING
ISSUE POSSIBLE CAUSES RESOLUTION
F6 EC Temp
o
Blockage of cool air into
the oven.
o
Rear cooling fan exhaust
guard is clogged.
o
Check for paper towels or anything
that may be obstructing cool air into
the oven.
o
Check rear fan to see if it is free of
debris. Clean as required.
Wave Guide
Cover is broken
or damaged.
o
User abuse.
o
Call Customer Service.*
CATALYTIC CONVERTER
The catalytic converter is installed in the return air
duct behind heater assembly. A qualified technician
must perform the removal or installation of the
catalytic converter.
IMPORTANT NOTE: The catalytic converter can
be cleaned with TurboChef Oven Cleaner
and thoroughly rinsed with distilled water. Let the
catalytic converter air dry before re-installing. If
TurboChef Oven Cleaner is not available, DO NOT
SUBSTITUTE USE DISTILLED WATER ONLY.
Due to the nature of most foods and the physics
governing the operation of the oven, grease buildup
downstream of the cook cavity is inevitable. A
strict cleaning regiment can solve a majority of the
problems; however, recirculation of undiluted grease-
saturated air is the main cause of downstream grease
accumulation and any associated residual flavors.
Airborne grease tends to collect and bake onto the
oven’s surface downstream of the cook cavity. Due
to the high operating temperatures of the oven, this
grease will start to rapidly decompose into deriva-
tive organic compounds.
These decompositional derivatives generally have
positive and negative effects on cooking. Shorter
chain derivatives add favorable flavor characteristics
to the food, while the higher order carbon chains
lend unpleasant flavor characteristics, such as bitter,
tarry tastes. The installation of a catalytic converter
greatly affects the grease handling and any residual
flavors which might build up over time. A properly
operating catalytic converter causes the conversion
of airborne grease into water, carbon dioxide, and
small amounts of nitrogen and oxygen. The catalytic
converter acts as a combustion chamber for airborne
grease. The catalysts present on the filter lower the
ignition temperature of the airborne grease from
approximately 700ºF to 450–550ºF (371ºC to
232–288ºC), allowing combustion to occur. The
operating temperature of the oven directly deter-
mines the percentage of airborne grease conversion.
A single pass of the air stream yields a 20–30%
improvement in air quality.
Problems with the catalytic converter are indicated
by a decrease in the effectiveness of browning (caused
by a reduction in airflow) or by flavor transfer from
one food group to another.
If you experience a problem with the catalytic
converter, contact a TurboChef qualified service
agency, Customer Service at 800.90TURBO/
+1 214-379-6000, or your Authorized Distributor.
*For Customer Service, call 800.90TURBO/+1 2143796000 or your Authorized Distributor.
29
MAINTENANCE AND TROUBLESHOOTING
30
North America Limited Warranty
TURBOCHEF “TORNADO” HIGH SPEED TOASTING OVEN NORTH AMERICA
The TurboChef speed cook oven Limited Warranty outlined below is activated upon shipment of your
oven. Should you require additional assistance after reviewing the warranty outlined below, please call
TurboChef Customer Service at 800.90TURBO.
LIMITED WARRANTY
TurboChef Technologies, Inc. (“TurboChef”) warrants to you, the purchaser, that under normal use the
TurboChef speed cook oven you have purchased (the “Equipment”) will be free from defects in material
and workmanship during the Warranty Period, subject to the terms and conditions set forth herein. The
“Warranty Period” is twelve (12) months from the date the Equipment is shipped from TurboChef’s
U.S. factory or distribution center. This warranty is conditioned upon you promptly notifying TurboChef
of any claims, as provided in the paragraph entitled “Warranty Claims” below, and providing TurboChef
with all data and information requested by TurboChef or its service agents in connection with such
claims as well as all necessary access to your premises and the Equipment. This warranty is made only to
the initial purchaser of the Equipment from TurboChef or its authorized dealer; it is not assignable to
subsequent purchasers unless TurboChef consents to such assignment in writing.
DISCLAIMER OF WARRANTIES
Except as provided in the Limited Warranty above, the Equipment is provided “as-is”. TurboChef dis-
claims all other warranties, express, statutory or implied, including without limitation, the implied war-
ranties of title, non-infringement, merchantability and fitness for a particular purpose. TurboChef does
not warrant that the Equipment will meet your specifications or needs. You acknowledge that you are
solely responsible for the selection of the Equipment and determining the suitability of the Equipment
for your needs.
WARRANTY EXCLUSIONS
Improper Installation, Operation or Maintenance: Equipment that is not installed, operated and
maintained in accordance with TurboChef’s speed cook oven owner’s manual (as may be updated by
TurboChef from time to time, the “Manual”), a copy of which is provided to you with the Equipment or
otherwise will be furnished to you upon request, is excluded from this warranty. This warranty does not
apply to damage or failure which results, in TurboChef’s or its service agent’s sole opinion, from failure
to provide a suitable installation and operating environment (including power and HVAC) and facilities
as prescribed by the Manual, misuse, abuse, accident, neglect, power failure or power surges (over or
under voltage), or to damage or failure from flood, fire, lightning or other natural or man-made disas-
ters, or other Acts of God, or to Equipment that has missing or altered serial numbers.
Modifications and Repair: Equipment that has been modified or altered by persons other than
TurboChef or its service agents, or Equipment that has had non-approved devices or connection items
attached thereto, is excluded from coverage under this warranty. Repair of the Equipment by anyone
other than TurboChef or its authorized service agents will void all warranties on the Equipment.
NORTH AMERICA LIMITED WARRANTY
31
NORTH AMERICA LIMITED WARRANTY
Accessories: Accessories and parts (collectively “Accessories”) that are consumed in the normal course of
Equipment operation or maintenance are excluded from this warranty. Failure of or damage to Equipment
or components from the use of non-approved cleaning chemicals, devices or processes is also excluded
from this warranty. Accessories may include, but are not limited to, ceramic cooking platters, ceramic
Wave Guide Covers, paddles and approved cleaning chemicals and devices.
Outstanding Invoices: If the full invoiced amount for Equipment purchased has not been paid within
forty-five (45) days from the invoice date, then TurboChef will have no obligation to honor this or any
other warranty on the Equipment until payment is received in full, including any accrued interest or
other charges, has been satisfied, at which time warranty coverage will be reinstated, but the Warranty
Period will not be extended.
WARRANTY SERVICE, EXCLUSIVE REMEDY
TurboChef will be solely responsible for determining whether or not the Equipment or any compo-
nent thereof is defective. Defective components covered by this warranty will be repaired or replaced at
TurboChef’s option without charge to you and such repaired or replacement components will be covered
by this warranty for the balance of the Warranty Period. Parts used in the repair of defective compo-
nents and replacement components may be new, recovered or rebuilt. At its sole option, TurboChef
may decide to replace defective Equipment covered by this warranty with new, recovered or rebuilt
Equipment of equal or greater capability, and such Equipment will be covered by this Limited Warranty
for the balance of the Warranty Period. Defective Equipment and components will become the property
of TurboChef. This paragraph states TurboChef’s sole and exclusive obligation and liability and your
sole and exclusive remedy under this warranty. TurboChef shall not be responsible for a failure to pro-
vide warranty services due to causes beyond TurboChef’s or its service agents’ control.
WARRANTY CLAIMS
Claims under this warranty must be reported to TurboChef during our normal working hours at the
following number: 800.90TURBO, or such other reporting service as TurboChef may designate. Upon
receipt of the claim and related information and preliminary verification that the claim is valid, TurboChef
will promptly notify an authorized service agent to contact you and arrange for an on-site repair visit during
the service agent’s normal working hours. Any costs incurred by TurboChef or its service agent associated
with a service agent being refused or unable to gain access to the Equipment on your premises, or a claim
not covered by this warranty, will be charged to you.
CHARGES FOR NONWARRANTY SERVICE
In the event that repairs, replacement or service are provided by TurboChef’s service agents for work
not covered by this warranty, prior to commencing such work or service, the service agent will obtain your
permission to proceed and will invoice you directly for such work or service. You will pay the service agent
directly according to the service agent’s normal scale of charges and business terms.
32
DISCLAIMER OF DAMAGES
TurboChef disclaims all incidental, special and consequential damages, including but not limited to loss
of use, lost revenue or profits, or substitute use, suffered by you or any third party, whether arising in
contract, tort (including negligence), or otherwise, resulting from any breach by TurboChef or its service
agents of this warranty, or resulting from the manufacture, use, or defects, of or in the Equipment, even
if TurboChef was apprised of the possibility of such damages.
CUSTOMER INDEMNITY
You agree to indemnify, defend and hold TurboChef harmless from all third party claims, demands,
judgments, fees and costs directly or indirectly arising out of or related to your use of the Equipment.
You further agree to indemnify and hold TurboChef harmless from any incidental, consequential or
special damages suffered by you, including lost revenue or profits, loss of use, or substitute use, during
periods of Equipment failure or loss of use.
TERRITORY
This warranty is valid in the United States of America, Canada and Puerto Rico.
GOVERNING LAW, ENTIRE WARRANTY
This warranty shall be governed and construed in accordance with the laws of the State of Georgia,
USA (except with respect to its provisions regarding conflicts of laws). The warranty described herein is
the complete and only warranty for Equipment and supersedes all prior oral or written agreements and
understandings that may have existed between us relating to Equipment warranties. The terms of this
warranty may not be altered, amended or modified except by a signed writing from TurboChef. Any
purported alteration, amendment or modification by a service agent or anyone else will not be enforceable
against TurboChef.
WARRANTY PARTS RETURN
TurboChef Technologies, Inc.
Attention: Warranty Parts
2801 Trade Center Drive
Carrollton, Texas 75007
NORTH AMERICA LIMITED WARRANTY
33
INTERNATIONAL LIMITED WARRANTY
International Limited Warranty
This Limited Warranty shall apply to the sales of all TurboChef “Tornado” Series ovens (the “Equipment”)
manufactured by TurboChef Technologies, Inc. (“TurboChef”), and sold to purchasers outside of
the United States, Canada, Puerto Rico, Central and South America by an Authorized Distributor of
TurboChef International (the “Authorized Distributor”).
LIMITED WARRANTY
You, the purchaser (“You”) have entered into a sales contract with the Authorized Distributor for the
purchase of the Equipment. This Limited Warranty is made to you by the Authorized Distributor from
whom you purchased the Equipment with the support of TurboChef. Subject to the limitations stated
below, the Authorized Distributor warrants to You that the quantity and specification of the Equipment
delivered to You shall be as set out in the Authorized Distributor’s acceptance of your order and that the
Equipment will be free from any material defects in the product and workmanship for twelve (12) months
from the date of installation (the “Warranty Period”), subject to the terms and conditions set forth herein.
DISCLAIMER
You acknowledge that You are solely responsible for the selection of the Equipment and determining the
suitability of the Equipment for Your needs. All other warranties, conditions or terms relating to fitness
for purpose, quality or condition of the Equipment, whether expressed or implied by statute or common
law or otherwise are excluded to the fullest extent permitted by law.
THE TURBOCHEF GLOBAL WARRANTY SYSTEM
This Limited Warranty commences upon delivery of the Equipment to Your premises. The Authorized
Distributor will inspect and install the Equipment at Your premises in accordance with TurboChef’s instruc-
tions and will record the serial number of the Equipment, Your contact details, the date and location of
installation and the results of the Authorized Distributor’s inspection. This information will be entered
by the Authorized Distributor into the TurboChef global warranty system and will be used by TurboChef,
the Authorized Distributor and its authorized service agents for the provision of the warranty service.
WARRANTY SERVICE
During the Warranty Period, any materially defective Equipment will be repaired or replaced free of charge
at TurboChef’s option provided that:
1. You notify the Authorized Distributor from whom You purchased the Equipment and/or TurboChef
as soon as reasonably possible after discovery of a defect and in accordance with the warranty claims
procedure set out below;
2. You provide the Authorized Distributor from whom You purchased the Equipment and/or TurboChef
with all data and information reasonably requested by TurboChef, the Authorized Distributor or its
authorized service agents in connection with Your warranty claim;
34
INTERNATIONAL LIMITED WARRANTY
3. You make the Equipment available to TurboChef, the Authorized Distributor or its authorized service
agents;
4. The Equipment has been installed by an Authorized Distributor and you have provided all necessary
information for the Authorized Distributor to register the Equipment in the TurboChef global warranty
system;
5. The Equipment has been operated and maintained by You in accordance with TurboChef’s “Owner’s
Manual” provided with the Equipment (and as updated by TurboChef);
6. You have not used any non-approved devices, accessories, consumables or parts in conjunction with
the Equipment; and
7. Repairs, modifications or alterations have not been attempted other than by TurboChef, an
Authorized Distributor or its authorized service agent.
Neither TurboChef nor the Authorized Distributor assumes any liability for damage caused by Your failure
to provide a suitable installation and operating environment (including power and HVAC) or facilities as
prescribed by the Manual, misuse or abuse or by accident, neglect, power failure or power surges (over or
under voltage) howsoever arising.
At its sole option, TurboChef may replace defective Equipment or components with new, recovered or
rebuilt Equipment of equal or greater capability, and such Equipment or components will be warranted
by the Authorized Distributor for the balance of the Warranty Period. Replaced defective Equipment or
components will become the property of TurboChef.
Warranty Claims: Any warranty claim must be made directly in writing either to the Authorized
Distributor from whom You purchased the Equipment or to TurboChef at the following address:
TurboChef Technologies, Inc.
2801 Trade Center Drive
Carrollton, Texas 75007
Phone: +1 214-379-6000
Fax: +1 214-379-6073
The claim must include the serial number of the Equipment and be received by TurboChef on or
before the last day of the Warranty Period. Upon receipt of Your claim, TurboChef will promptly notify
an Authorized Distributor or an authorized service agent to contact You, to verify Your claim and, if
necessary, to arrange for an on-site repair visit during normal working hours.
Consumables and Parts Used with The Equipment: Neither TurboChef nor the Authorized
Distributor assumes any liability for consumables and parts that are used in the normal course of
Equipment operation or for failure of or damage to Equipment or components from the use of non-
approved cleaning chemicals, devices or processes.
Charges for Service Not Covered by Limited Warranty: In the event that You request and receive
repairs, replacement or service not covered by this Limited Warranty, You will be invoiced and must
pay the Authorized Distributor or authorized service agent directly according to its normal scale of
charges and business terms.
35
INTERNATIONAL LIMITED WARRANTY
Product Liability: Neither TurboChef nor the Authorized Distributor assumes any liability for any inci-
dental, special or consequential damages, including but not limited to loss of use, lost revenue or prof-
its, or substitute use suffered by You or any third party, whether arising in contract, tort (including
negligence), or otherwise resulting from any breach by TurboChef or the Authorized Distributor of the
Limited Warranty provided herein.
Exclusive Remedy: This Limited Warranty states the Authorized Distributors and TurboChef’s sole and
exclusive obligation and liability and your sole and exclusive remedy under this Limited Warranty.
Third Party Rights: The UK Contract (Rights of Third Parties) Act 1999 is excluded from applying to
this Limited Warranty and nothing herein confers or purports to confer on any third party any benefit or
any right to enforce any term of this Limited Warranty.
Severability: If any item or provision contained in this Limited Warranty or any part of them (“an offend-
ing provision”) is declared to be or becomes unenforceable, invalid or illegal for any reason whatsoever in
any jurisdiction, the other terms and provisions of this Limited Warranty shall remain in full force and
effect in that jurisdiction as if it had been executed without the offending provision appearing in it and
the entire Limited Warranty shall remain in full force and effect in all other jurisdictions.
Governing Law, Entire, Agreement: This Limited Warranty shall be governed by and construed
according
to English law. The application of the United Nations Convention on International Sale of Goods to
this Limited Warranty is expressly excluded. This Limited Warranty may not be altered, amended or
modified by the Authorized Distributor or its service agent, and no representation, alteration, amendment
or modification by TurboChef shall be valid unless in a signed form from TurboChef.
WARRANTY PARTS RETURN
TurboChef Technologies, Inc.
Attention: Warranty Parts
2801 Trade Center Drive
Carrollton, Texas 75007
For service or information:
Customer Service at 800.90 or
Sales & Marketing at 866.90
+1 214-379-6000 or Your Authorized Distributor
Part Number: NGC-1006/Revision L/June 2015
Country Code: NA/EU
TM
Global Operations
2801 Trade Center Drive
Carrollton, Texas 75007
+1 214-379-6000
+1 214-379-6073
Customer Support:
1-800-90
+1 214-379-6000
turbochef.com
